Emerald Green Arborvitae Spacing for Hedges and Screens

Space Emerald Green arborvitae 36 to 48 inches from trunk to trunk for a one-row privacy hedge. Use the closer end of that range when you want the hedge to fill in sooner, and use the wider end when you want each tree to have more room to keep its natural shape. The best layout also depends on your available planting depth, the height of screen you need, and whether a single or staggered double row makes sense.

Understand Emerald Green Arborvitae at Maturity

Emerald Green arborvitae is a narrow, upright evergreen often used where a full-sized tree hedge would take up too much yard. A mature plant is usually 12 to 15 feet tall and 3 to 4 feet wide.

That mature width is why spacing matters more than the size of the nursery plants you bring home. Young arborvitae can look slim enough to place very close together, but their branches expand as the hedge settles in.

Hedge spacing is a long-term choice: the smallest gap looks denser now, while the wider gap gives each tree more of its natural form.

Measure from the center of one trunk to the center of the next trunk. Do not measure from pot edge to pot edge or from the outermost branches, since container sizes and foliage widths vary.

Plan a One-Row Privacy Hedge

Choose the layout that fits the job before buying plants or digging holes.

Planting Goal Spacing or Layout Best For
One-row privacy hedge 36 to 48 inches trunk to trunk A dense evergreen screen along a fence, property edge, or patio
Individual specimen plants 5 to 6 feet apart Showing off each tree’s individual columnar form
Staggered double-row screen Two rows 4 feet apart Creating a deeper, fuller planting bed

Step 1: Choose Your Hedge Spacing

  1. Select a spacing between 36 and 48 inches from trunk to trunk for a one-row hedge.
  2. Choose 36 inches for a one-row hedge.
  3. Choose 48 inches for a one-row hedge when you have room for wider spacing.
  4. Keep the same spacing through the run unless an obstacle requires a deliberate adjustment. Randomly changing the gaps makes a hedge look uneven once it grows.

A hedge is not necessarily better because the plants are closest together. Crowding can make individual plants compete for light, moisture, and root space while doing little to improve the screen after branches have already met.

Step 2: Mark the Centers Before Digging

  1. Confirm the planting area, property boundary, local setback requirements, and any easements before laying out the hedge.
  2. Have underground utilities marked before digging.
  3. Stretch a string along the proposed hedge line. This gives you a straight visual reference and prevents the row from drifting as you work.
  4. Place a stake at the intended center of each trunk, using your chosen spacing from stake to stake.
  5. Stand back and view the line from the places where privacy matters most, such as a patio, window, driveway, or neighboring property. Adjust the entire line before digging if it feels too close to a walkway, fence, or house.

Planting in a straight line creates a formal screen. A gentle curve can look more natural, but keep the measured spacing consistent along the curve.

Step 3: Calculate How Many Plants You Need

For a hedge with a plant at each end, divide the length of the planting run by the spacing, round up, and add one plant.

For example, a 50-foot hedge planted at 3-foot spacing needs 18 plants. Measure the actual run where trunks will be planted, not simply the length of a fence or lot line; gates, corners, utility boxes, and existing trees may shorten the usable stretch.

Buy plants that are similar in height and fullness when possible. A uniform starting row will look more even while the hedge establishes.

Step 4: Plant the Marked Layout

  1. Dig each planting hole at its marked trunk center. Make the hole no deeper than the root ball so the plant does not settle too low after watering.
  2. Remove the container or wrapping, inspect the roots, and gently loosen any roots circling tightly around the root ball.
  3. Set each arborvitae upright with the top of the root ball level with the surrounding soil.
  4. Turn the tree so its fullest side faces the view you want screened, then check it against the string line before backfilling.
  5. Backfill with the excavated soil, firming it gently enough to remove large air pockets without compacting the ground heavily.
  6. Water deeply to settle the soil around the roots, then add mulch over the planting area while keeping mulch away from the trunks.

Remove the string once all plants are upright and evenly spaced. Check the row from both ends; correcting a leaning plant immediately is much easier than straightening an established hedge later.

Use a Staggered Two-Row Layout for More Depth

A staggered layout can create a thicker-looking screen without placing every tree in a single crowded line. Plant the two rows 4 feet apart, then position each tree in the back row in the gap between two trees in the front row.

This creates a zigzag pattern rather than two rows with trunks directly aligned. Keep the spacing between trees within each row consistent with the one-row hedge spacing you selected.

A double row uses more plants, more mulch, and more yard depth. It works best where you need privacy from several viewing angles or want a more natural, layered evergreen border. It is less useful in a narrow side yard, where a single well-spaced row may provide the screen without taking over the whole bed.

Before committing, mark both rows with stakes and walk around the area. Make sure the planting bed will still leave practical room for mowing, access to fences, drainage routes, and maintenance.

Match the Hedge to the Site and Screen Height

Emerald Green arborvitae is a good fit when a screen in the 12- to 15-foot range will meet your privacy goal. If you need a much taller windbreak or need to block a second-story view, a different tree or a mixed planting may be a better choice.

Choose a location with suitable light and soil conditions for arborvitae, and avoid treating the hedge as a way to solve a difficult site. Trees planted where water repeatedly stands, where roof runoff hits the same spot, or where road salt and deicing spray collect can struggle regardless of their spacing.

Also consider the mature width before planting near structures. A hedge that eventually presses against siding, fences, air-conditioning equipment, gates, or walkways will require ongoing pruning and may lose its balanced shape.

If you are planting along a property line, keep the full future hedge on your side of the boundary. Arborvitae branches may look narrow at planting time, but the hedge will occupy a wider strip as it matures.

Expect a Gradual Privacy Screen

Emerald Green arborvitae commonly grows about 6 to 12 inches per year. Check the plant seller’s stated growth rate and local growing conditions, since weather, soil drainage, transplant stress, light, and the starting size of the plants all affect how quickly a hedge fills in.

Height is only one part of privacy. A hedge can become useful before it reaches its final height if the branches begin meeting across the gaps. Conversely, tall plants with open lower branches may not provide much screening at eye level.

Consider the plant’s current height and expected annual growth range when estimating screen growth. A larger nursery plant can provide an earlier visual screen, but spacing still needs to account for the tree’s mature width.

Avoid shearing young trees heavily to force instant density. Light shaping of green outer tips can help keep a hedge tidy, but cutting deeply into bare brown interior wood can leave permanent gaps.

Keep the Hedge Full and Healthy

A well-spaced hedge still needs basic care while its roots establish. Check the soil beneath the mulch during dry weather so the root balls do not dry out, but avoid keeping the planting area constantly soggy.

Use mulch to reduce weed competition and moderate soil moisture. Keep a visible gap between mulch and each trunk so damp material does not stay pressed against the bark.

Watch for these signs that the layout or site needs attention:

  • One tree leans or sits lower than the others.
  • A plant is noticeably drier than neighboring plants after watering.
  • Lower branches are being blocked by dense weeds, lawn growth, or piled mulch.
  • Branches are beginning to press against a fence, wall, or walkway.
  • A gap remains because one plant is much smaller or less healthy than the rest.

Replace a failed or severely undersized plant promptly if you want a uniform hedge. Waiting several growing seasons before filling a gap can leave a permanent weak spot in the screen.

Measure and stake the full planting run before ordering plants. That one step will tell you whether a single row, a staggered screen, or a different privacy plant is the best fit for your yard.

Frequently Asked Questions

How long does it take Emerald Green arborvitae to grow to 10 feet?

Emerald Green arborvitae commonly adds 6 to 12 inches of growth per year, but the time to reach 10 feet depends on how tall the plant is when you buy it. Consider the plant’s starting height and annual growth rate when estimating growth. Local growing conditions and transplant stress can slow the first stages of growth.

Where Should I Not Plant Arborvitae?

Do not plant arborvitae where mature branches will be forced against a house, fence, gate, utility equipment, or narrow walkway. Avoid areas with persistent standing water, repeated salt spray, or concentrated roof runoff. Also avoid planting before you have confirmed property lines and underground utilities.

What Pairs Well With Arborvitae?

Low-growing ornamental grasses, flowering perennials, and shrubs can work well on the open side of an arborvitae hedge if they tolerate the same light and soil conditions. Choose companion plants that will not crowd the young root balls, and expect the hedge to cast more shade as it fills in. A mulched strip is often the simplest choice directly beneath and between newly planted arborvitae.

How far apart should you plant Emerald Green arborvitae?

For a one-row privacy hedge, set Emerald Green arborvitae 36 to 48 inches apart from trunk center to trunk center. This equals 3 to 4 feet between plants and allows the hedge to develop without placing the trees too close together.